Jun 22, 2026
test22
sss
Your ev1, Your Canvas
cc
-
Check your connection: Your ev¹ (ev¹c) needs a stable Wi-Fi connection to download the package.
-
Check your battery level: Ensure your vehicle has at least 50% battery, or keep the device charging.
-
Clear your schedule: The whole updating process takes around 30 minutes. The vehicle’s screens and systems will be completely offline during this time.
Armrest Interface
add new features
|
head
|
s
|
s
|
s
|
f
|
|---|---|---|---|---|
|
second
|
k
|
j
|
h
|
g
|
|
l
|
l
|
l
|
l
|
l
|
|
l
|
l
|
l
|
l
|
l
|
A warning screen will pop up reminding you that your vehicle will be unusable for about 30 minutes while it reboots. Tap Confirm to acknowledge the message and proceed with updating.
-
a
-
s
-
G
-
fg
-
-
a
-
v
This upgrade takes approximately 30 minutes to complete. The device will reboot automatically during the process, and the screen may freeze at times. Please do not be alarmed. If the upgrade has not completed after 1 hour, please restart the device and reattempt. The device is unable to be used during the upgrade.
|
head
|
s
|
s
|
s
|
f
|
|---|---|---|---|---|
|
l
|
k
|
j
|
h
|
g
|
|
l
|
l
|
l
|
l
|
l
|
|
l
|
l
|
l
|
l
|
l
|
sss
-
a
-
s
-
G
-
fg
-
-
a
-
v
sss
New Features:
Control & Safety
-
Pressing the power button while driving now triggers a controlled emergency stop.
-
Optimized Optimised reverse camera experience
-
When the reverse camera is auto-triggered, returning the joystick to the center centre now immediately exits the reverse view.
-
Auto-Pilot no longer triggers the reverse camera when reversing.
-
-
The joystick trigger button no longer switches to Co-Pilot+ mode. The trigger will be customizable customisable in a future update.
|
test1 |
test2 |
test3 |
test3 |
test3 |
|
test1 |
test2 |
test3 |
test3 |
test3 |
|
test1 |
test2 |
test3 |
test3 |
test3 |
|
test1 |
test2 |
test3 |
test3 |
test3 |
|
test1 |
test2 |
test3 |
test3 |
test3 |
The Pre-Update Checklist
Software updates are major system overhauls. Before you press the "update" button, make sure your ev¹ (ev¹c) is parked.
-
Check your connection: Your ev¹ (ev¹c) needs a stable Wi-Fi connection to download the package.
-
Check your battery level: Ensure your vehicle has at least 50% battery, or keep the device charging.
-
Clear your schedule: The whole updating process takes around 30 minutes. The vehicle’s screens and systems will be completely offline during this time.
Step-by-Step: How to Update Your Strutt ev¹ ev¹c Firmware
Ready to go? Follow these quick steps to upgrade your ev¹ ev¹c.
Step 1: Look for the Information Menu From your main home screen, swipe down from the top to pull up the quick-access menu. Tap the Information button (the icon with the "i" inside a circle).
Step 2: Check Your Current Version You are now on the Vehicle Information screen. Your version number will be displayed next to the Version field. Tap on it to see the available upgrade.
sss
Step 3: Read the System Update information Tap the version number on your screen to read the release notes. Press the yellow Update button at the bottom of your screen to acknowledge the firmware you will be upgrading to.
Step 4: Confirm the Installation update message A warning screen will pop up reminding you that your vehicle will be unusable for about 30 minutes while it reboots. Tap Confirm to acknowledge the message and proceed with updating.
Step 5: Hang Tight Your screen will switch to a progress bar showing downloads and updates. The system will automatically reboot when the update is completed.
Q: Did the system update fail? If you see the message below, turn the vehicle off and on again. The system update screen will appear. Next, repeat the update process above.
Step 6: Verify the Update Once the updates are complete and the system reboots, double-check that the firmware has been upgraded to the latest version. Repeat Steps 1 and 2 to open your Vehicle Information screen. Look for the version number field and confirm that the new version number is indicated.
Troubleshooting: What if the update fails?
Tech hiccups happen. If your screen flashes a "Download failed" error, please try again. Run through the checklist before you try upgrading again:
-
Did your Wi-Fi drop off? Check that your Wi-Fi is stable, and your signal is still strong.
-
Did you check your battery health? Ensure that your battery is at least 50% charged.
-
Give it another shot: Once you've confirmed your Wi-Fi and battery health, start over from Step 1.
If you are still getting an error message after a second try, reach out to Strutt Customer Support at support@strutt.inc. Our team can help troubleshoot the issue and get you back on the road safely.
Facebook Group
📱 Over-The-Air Update: Is your ev¹ running the latest software?
Hey Strutt Drivers! 👋
Our engineering team has been hard at work behind the scenes, rolling out new optimizations and safety tweaks to ensure your vehicle runs as smoothly as possible. Just like your smartphone, your vehicle gets smarter over time!
If you have a notification waiting on your dashboard, you are just an update away.
Check out our step-by-step walkthrough, including how to navigate to the information screen, verify your firmware version, and troubleshoot technical hiccups.
👇 Get the full step-by-step guide here: [Link to Blog Post: How to Update Your Strutt ev¹ Software - US website link]
Have a safe drive! ⚡🚘
